Obelux low-intensity obstruction light: ICAO Type A 10cd, ICAO Type B 32cd, ICAO Type E 32cd, 50cd, FAA L-810/F, Canada CL-810/F. Including fully Night Vision Goggle (NVG) compliant infrared. The light is designed for marking tall structures such as wind turbines, chimneys, masts, and towers. The product offers unique features such as fault monitoring, photocell and switcher incorporated in the light. Optionally, the lights can be connected to Obelux aviation light system through Modbus.
LIT series is Obelux’s unique design to mark intermediary levels on wind turbines. The light is installed from inside the tower through extremely small hole. All maintenance and replacement work can be done from inside the tower which allows savings in case of maintenance or repair is needed.
The Obelux Low-Intensity Portable (LI-P) is a portable, battery-operated red obstruction light. It is available in the configurations red and red+IR (infrared). The Obelux LI-P is designed for outdoor use and features a shock-resistant polycarbonate enclosure. Typical battery operating time is up to 5 months (operating mode: red 32 cd, flash rate 20 flashes per minute, and photocell-controlled day/night operation). Optionally, the LI-P is also available with an integrated GPS receiver for flash synchronisation.
Obelux low-intensity 10cd model Hindernisfeuer/Hindernisfeuer ES, including infrared (IR), designed and certified for Germany. The product offers unique features such as fault monitoring, photocell and integrated GPS antenna for flash synchronisation.
Obelux low-intensity stand-alone series is designed for marking tall structures such as wind turbines, chimneys, masts, and towers. The product offers unique features such as fault monitoring, photocell and switcher incorporated in the light.
Obelux low-intensity stand-alone series is designed for marking tall structures such as wind turbines, chimneys, masts, and towers. The product offers unique features such as fault monitoring, photocell and switcher incorporated in the light.
Obelux infrared 850 nm LED obstruction lights are compatible with UK Ministry of Defence (MoD) requirements and meet ICAO Low-Intensity Type B (32 cd) and FAA L-810 requirements. They are fully compatible with night vision goggles (NVGs).
The Obelux ICAO Medium-Intensity Type B/C red model with infrared is ideal for marking tall structures such as wind turbines, transmission masts, chimneys, broadcast towers, and bridges. Built for durability and reliability in even the harshest environments, it is an excellent choice for offshore wind turbines. The light features integrated fault monitoring, a photocell, and GPS synchronisation. It can operate as a stand-alone unit or seamlessly connect to an Obelux aviation light system via Modbus RTU (RS-485) or Modbus TCP.
The Obelux FAA Medium-Intensity L-864 / L-885 Red Obstruction Light model with infrared is ideal for marking tall structures such as wind turbines, transmission masts, chimneys, broadcast towers, and bridges. Built for durability and reliability in even the harshest environments, it is an excellent choice for offshore wind turbines. The light features integrated fault monitoring, a photocell, and GPS synchronization. It can operate as a stand-alone unit or seamlessly connect to an Obelux aviation light system via Modbus RTU (RS-485) or Modbus TCP.
The Obelux medium-intensity type A (night) model with infrared is ideal for marking tall structures such as wind turbines, transmission masts, chimneys, broadcast towers, and bridges. Built for durability and reliability in even the harshest environments, it is an excellent choice for offshore wind turbines. The light features integrated fault monitoring, a photocell, and GPS synchronization. It can operate as a stand-alone unit or seamlessly connect to an Obelux aviation light system via Modbus RTU (RS-485) or Modbus TCP.
Obelux medium-intensity model for White only (20,000cd WHITE / 2,000cd WHITE) or White and Red (20.000cd WHITE / 2.000cd RED) are used for marking tall structures, such as wind turbines, transmission masts, chimneys, broadcast masts, etc. The product offers unique features such as possibility to be configured as Medium Intensity white only or dual, i.e. white and red, incorporated fault monitoring, photocell, GPS synchronization, infrared and support for both stand-alone and Modbus operation as a part of Obelux aviation light system network.
Obelux medium-intensity stand-alone 20,000 cd White and Red model is used for marking tall structures, such as wind turbines, transmission masts, chimneys, broadcast masts, etc. The product offers unique features such as incorporated fault monitoring, photocell, GPS synchronization, and it supports both stand-alone and Modbus operation as a part of Obelux aviation light system network.
Obelux medium-intensity stand-alone 2 000 cd Red model is used for marking tall structures, such as wind turbines, transmission masts, chimneys, broadcast masts, etc. The product offers unique features such as incorporated fault monitoring, photocell, GPS synchronization, and it supports both stand-alone and Modbus operation as a part of Obelux aviation light system network.
Obelux medium-intensity stand-alone 2 000 cd Red model is used for marking tall structures, such as wind turbines, transmission masts, chimneys, broadcast masts, etc. The product offers unique features such as incorporated fault monitoring, photocell, and GPS synchronization, while fulfilling the specifications for Mexico.
Obelux medium-intensity stand-alone 20,000 cd White and W, rot ES Red model is designed for wind turbines in the German market. The product offers unique features such as incorporated fault monitoring, photocell, GPS synchronization. Serial RS-485 and Ethernet interfaces as an option.
Obelux low-intensity 170cd model W, rot ES. This model is designed and certified for wind turbines in Germany. The product offers unique features such as fault monitoring, photocell and integrated GPS antenna for flash synchronization.
Obelux low-intensity 10 cd and medium-intensity 100 cd light incorporates infrared which makes it completely Night Vision Goggle (NVG) compatible obstruction light. The light is designed for marking tall structures such as wind turbines, chimneys, masts, cranes, and towers. The product can offer unique features such as fault monitoring, photocell and switcher incorporated in the light. Lights can also be connected to Obelux aviation light system through Modbus serial lines.
The Obelux ICAO High-Intensity Type A (200,000 cd) obstruction light is designed for marking structures such as tall buildings, masts, and chimneys. The product offers unique built-in features, including fault monitoring, an integrated photocell, and GPS synchronisation. It supports both stand-alone operation and Modbus communication, allowing seamless integration into an Obelux aviation light system.
Obelux high-intensity omni-directional obstruction light is designed to mark tall structures such as wind turbines, towers, and masts. Obelux high-intensity 100,000 cd stand-alone unit has an integrated Day/Night switch, flasher, and infra-red. Additional options such as GPS sync. and Modbus communication are available.
Obelux high-intensity stand-alone white 50 000 cd and medium-intensity red 2 000 cd model is used for marking tall structures, such as wind turbines, transmission masts, chimneys, broadcast masts, etc. The product offers unique features such as incorporated fault monitoring, photocell, GPS synchronization, and it supports both stand-alone and Modbus operation as a part of Obelux aviation light system network.